Tabletop Pre-Cut Lid Sealer The Table-Top Pre-Cut Lid Sealer is a cost-effective and versatile machine for sealing containers with pre-cut foil or non-metallic lids, which offers a good solution for low volume production requiring a tamper-evident heat-sealed container. Sequence of Operation Operation of unit is simple: The operator places a cup into the cup receptacle, manually places a lid on the cup, then advances the cup/slide assembly into the heat sealing position. A proximity switch activates the pneumatic heat sealer. After heat sealing, the operator retracts the cup/slide assembly and removes the selaed cup. It can produce at rates of 8-15 containers per minute depending on the product and operator skill. Special Features Coming Soon-Look for a 110 volt only Pre-Cut Sealer, no air required. All Machine Components are Made From Either Stainless Steel, Anodized Aluminum, or FDA Approved Plastics. Precision Slide Rails for Accurate and Consistent Cup and Lid Placement. Adjustable Temperature, Pressure, and Dwell Time. Machine Operates on a 110 volt, Single Phase, 60 Hertz Power, and Requires an Air Supply of 90 PSI. The Electrical Controls are Enclosed in a 4X Wash-down Safe Enclosure. Lock-out Main Switch Assures Safety and Security. Stainless Steel Enclosure for Operator Safety. Compact, Space-saving Design for Maximum Flexability, 18" High x 12" Deep x 22" Long. Easily Inter-changeable Parts for Other Cup Diameters are Available as an Option. Operator and Maintanece Manual Included. Click Here for a Quote!!! Quality Cup Packaging Machinery, Corp 5408 3M Drive N.E., Menomonie, WI 54751 Phone: (715) 235-1111. Fax: (715) 235-1880. Toll Free: (800) 732-4624. Email: Info@qualitycup.com